Christie Digital Systems 38-VIV205-01 - Manual (Page 11)

S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr
VIDEO/Y Cb/Pb Cr/Pr
RESET CONTROL PORT USB
AUDIO 1 AUDIO 2
ANALOG DIGITAL(DVI-D)
INPUT 1
INPUT 2
INPUT 3
R/C JACK
G B R H/V V
(MONO)
11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
When controlling the computer
with the Remote Control Unit
of the projector, connect the
mouse port of your personal
computer to this connector.
(Refer to P12.)
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to P13.)
Connect the audio output
(stereo) from the computer
to these jacks.
(Refer to P12.)
Connect the audio output
from video equipment to
these jacks.
(Refer to P13.)
When the audio output is
monaural, connect it to
the L (MONO) jack.
CONTROL PORT CONNECTOR
COMPUTER AUDIO
INPUT (1 and 2) JACKS
AUDIO INPUT JACKS VIDEO INPUT JACKS S-VIDEO INPUT JACK
Connect the composite video
output from video equipment to
the VIDEO/Y jack or connect
the component video outputs to
the VIDEO/Y, Cb/Pb and Cr/Pr
jacks. (Refer to P13.)
Connect the computer (digital/analog)
output to one of these terminals.
(Refer to P12.)
COMPUTER INPUT
TERMINALS (DIGITAL/ANALOG)
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on
pages 11 to 13 and connect properly.
This projector uses a micro processor
to control this unit, and occasionally
this micro processor may malfunction
and need to be reset. This can be
done by pressing the RESET button
with a pen, which will shut down and
restart unit. Do not use the RESET
function excessively.
RESET BUTTON
When controlling the computer
with the Remote Control Unit of
the projector, connect the USB
port of your personal computer
to this terminal. (Refer to P12.)
USB CONNECTOR (Series B)
✽ Do not press this button. This button
is used for our optional accessories.
Connect the component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync and
Vert. Sync.)} from computer
to G, B, R, H/V and V jacks.
(Refer to P12 and 13.)
5 BNC INPUT JACKS
When using the Wired/Wireless
Remote Control Unit as a Wired
Remote Control, connect the
Wired Remote Control Unit to
this jack with the Remote
Control Cable (supplied).
R/C JACK