Screw terminal patch strip, Features and benefits – Rane VP 12 User Guide User Manual

Page 8

Screw Terminal Patch Strip

This strip is configured from the factory with all functions operational in the same left-to-right order as
the front panel. Factory jumper locations are indicated by the arrows. This strip allows reconfiguring the
order of processing functions and/or wiring around unwanted functions. The

SIDE CHAIN PATCH allows the

insertion of external processing.

Features and Benefits:

Feature: Line/Both/Mic Switch

Benefit: Allows summing of both mic and line
inputs. No other voice processor has this feature.

Feature: High and Low Cut Filters

Benefit: Allows both high and low ends to be rolled
off. Often with voice signal there is little or no audio
in these areas, and this affords greater signal-to-
noise ratio.

Feature: Adaptive Ratio Sliding Band

De-esser Circuit.

Benefit: This totally new circuit design provides
more accurate de-essing with fewer artifacts and
more precise control than frequency dependent
compression.

Feature: Frequency Multiplier on

Parametric EQ.

Benefit: Allows each parametric band to cover 10
Hz to 20 kHz while maintaining precise control.

Feature: Parametric bands wired in

series.

Benefit: Doubling up on a frequency in both bands
allows twice the boost and cut.

Feature: Main and Aux Outputs

Benefit: Allows signal to be sent to the stereo input
of the next device or to two different locations with
independent level control.

Feature: Main Out Level (Mic-Line)

Switch:

Benefit: Allows feeding a mic level signal to the mic
input of a console.

Feature: Screw Terminal Patch Strip

Benefit: Allows processing functions to be re-
arranged or bypassed.

520-494 APR96