Rane PE 15 - Manual

Manual-1
OPERATORS MANUAL PE 15
PARAMETRIC EQUALIZER
QUICK START
If all else fails, read the manual. Yeah, yeah. But nothing is going to fail and you, being one smart cookie, don’t need
to read the stupid manual. But you should read this section just to cover your affairs. So, quickly, here goes.
The PE 15 has few hidden gotchas. One of these may be the shelving feature of Bands 1 and 5. Remember that
pulling on the bandwidth (BW) knob causes it to come forward with a positive click, indicating the Shelf Mode is active.
Use Shelving Bands 1 and 5 like Bass and Treble tone controls, where you want control over the whole top or bottom
ends of the spectrum.
Hook-up is simple. The PE 15 accepts all combinations of balanced or unbalanced, XLR, ¼" TRS or TS connectors.
However, note the INPUT connectors are wired in parallel and may not be used together. Use only one at a time. They
will not function as a summing type of Input for two different sources, but they may be used in a daisy chain fashion
to feed other units. On the other hand (to randomly pick a hackneyed expression), you may use the paralleled OUTPUTs
to drive two destinations.
Never connect anything except a Rane approved AC power supply to the thing that looks like a red telephone jack
on the rear of the PE 15.
WEAR PARTS: This product contains no wear parts.