Rane MS 1a Mic Stage Current version is here. - Manual (Page 4)

Data Sheet-4
MS 1a
MICROPHONE STAGE
All features & specifications subject to change without notice DOC 103262 PN 10564 7-99
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.com
CHASSIS GROUNDING
Units with outboard power supplies do not ground the
chassis through the line cord. Make sure that these units
are grounded either to another chassis which is earth
grounded, or directly to the grounding screw on an AC
outlet cover by means of a wire connected to a screw on
the chassis with a star washer to guarantee proper contact.
Please refer to RaneNote 110, “Sound System Inter-
connection” (supplied in your manual and available on
request separately) for further information on system
grounding.
Architectural Specifications
The microphone preamplifier shall be a single channel
stand-alone unit with remote power supply. The power supply
shall be U.L. listed, C.S.A. certified, and CE certified. The
input and output shall be fitted with XLR connectors. A
polarity inverting switch shall be included. Phantom power
shall be provided in compliance with DIN 45596 & IEC 268-
15 and be controlled by a slide switch with an LED indicator.
A gain control shall be provided with 21.5-66 dB adjustment
range. Power, system signal and overload indicators shall be
provided. High current cross-coupled active output line driver
shall be standard, as well as input RFI filter protection.
The unit shall be a Rane MS 1a Microphone Stage.