Rane Empath Rotary Mixer - Manual (Page 8)

Manual-6
CD Triggers
• The Empath mixer provides two CD triggers:
° CD1 TRIGGER switch determines trigger source
1 —› Input Fader 1 is the source
OFF —› No trigger
A —› A-side Crossfader is the source
° CD2 TRIGGER switch determines trigger source
3 —› Input Fader 3 is the source
OFF —› No trigger
B —› B-side Crossfader is the source
• Standard CD trigger format
° ⅛" (3.5 mm) mini TRS jacks
° Start pulse on Tip.
° Stop pulse on Ring/Sleeve.
° Normally high – Active low.
° Pulse width is 20 ms.
° Start threshold is at –65 dB of control attenuation.
° Stop threshold is at –75 dB of control attenuation.
• CD triggers may be used with some external effects processors and drum machines
° See manufacturers specifications for details.
Internal switching power supply
• Plug in virtually anywhere
• IEC inlet with power switch
• Universal internal switching power supply
• 100 to 240 VAC ±10%
• 50/60 Hz, 20 watts
• US 120 volt cord provided
Note: The internal fuse F1 should be replaced only by qualified service personnel with the same type and rating:
(Wickman, type TR5, #372-1100-000, 250 volt, 1.0 amp, time delay).
10 8
0 2
6 4 2 0
4 6 8 10
CD1 TRIGGER
1
OFF
A
CUE
A
B
CD2 TRIGGER
OFF
3 B
POST
A B
POST
A B
CUE
A B
POST CUE
4
2
3
9
1 10
8
6 5
7 4
2
3
9
1 10
8
6 5
7 4
2
3
9
1 10
8
6 5
7