Canon A510 - Manual (Page 137)

135
Appendix
Appendix
z To remove the conversion lens adapter, turn
the adapter in the opposite direction with
holding down the ring release button.
5 Set the lens on the adapter, and
attach it securely by turning it in
the indicated direction.
z Completely remove all dust and dirt from
conversion lenses with a lens blower brush
before use. The camera may focus on any
dirt that remains.
z Exercise due caution when handling the
lenses since it is easy to dirty them with
finger prints.
z Be careful not to drop the camera or
adapter when removing the ring.
z When shooting with these attachments,
please use the LCD monitor to compose
your shots. The attachments block part of
the view through the viewfinder, and the
area shown in the viewfinder does not
match the area of the shot that is actually
recorded. Also, the angle of view cannot be
confirmed in the viewfinder.
z You should not shoot images in mode
when using these attachments. Although it
is possible to select this mode at the
camera, the PhotoStitch software will not be
able to stitch the images together at the
computer.