Lithofin oil-ex – Pro-Link Lithofin Oil-Ex 120056 User Manual
Page 3

Material Safety Data Sheet
Printed: 13.06.2005
Revised: 13.06.2005
Lithofin OIL-EX
3
Use only in well ventilated areas.
Avoid contact with eyes and skin.
Keep receptacles tightly sealed.
Use solvent-proof equipment.
Avoid inhalation of vapours.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage
Requirements to be met by storerooms and receptacles:
Store receptacles tightly closed at a cool and dry place with sufficient ventilation
Provide solvent resistant, sealed floor.
Prevent any seepage into the ground.
Information about storage in one common storage facility:
Store away from foodstuffs.
Store away from feed.
Further information about storage conditions: None.
—————————————————————————————————————————————
8 Exposure controls and personal protection
Additional information about design of technical systems:
No further data; see item 7.
Components with limit values that require monitoring at the workplace:
112926-00-8 Silica, amorphous
PEL: Short-term value: 80 mg/m³
as % SiO2
REL: 6 mg/m³
TLV: 10 mg/m³ (e)
1330-20-7 xylene, mixed isomers, pure
PEL: 435 mg/m³, 100 ppm
REL: Short-term value: 655 mg/m³, 150 ppm
Long-term value: 435 mg/m³, 100 ppm
(o-, m-, & p-isomers)
TLV: Short-term value: 651 mg/m³, 150 ppm
Long-term value: 434 mg/m³, 100 ppm
BEI
95-63-6 1,2,4-trimethylbenzene
REL: 125 mg/m³, 25 ppm
TLV: 123 mg/m³, 25 ppm
100-41-4 ethylbenzene
PEL: 435 mg/m³, 100 ppm
REL: Short-term value: 545 mg/m³, 125 ppm
Long-term value: 435 mg/m³, 100 ppm
TLV: Short-term value: 543 mg/m³, 125 ppm
Long-term value: 434 mg/m³, 100 ppm
BEI
Additional information:
The lists that were valid during the creation were used as basis.
Personal protective equipment
General protective and hygienic measures
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.