Pro-Link 105R Marble Polishing Fluid 100017 - Manual (Page 3)

MATERIAL SAFETY DATA SHEET
105R Marble Polishing Fluid
MSDS #1005 11/9/01 Page 3 of 4
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: Control vapor concentration below the exposure limits. Use only
with adequate ventilation. Local exhaust ventilation may be necessary.
Respiratory Protection: When respiratory protection is required use a NIOSH approved
air-purifying respirator equipped with appropriate cartridges or canisters.
Skin Protection: Wear chemical-resistant clothing and gloves.
Eye/face Protection: Wear splash-resistant safety goggles.
EXPOSURE GUIDELINES
OSHA: PEL 3 mg/m
3
ACGIH: TLV 3 mg/m
3
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Opaque orange liquid
Odor: Orange odor
pH: 0.5 – 3.0
Vapor Pressure: Not Available
Vapor Density (air = 1): Not Available
Boiling Point: 212°C
Freezing Point: Not Available
Solubility in Water: Miscible
Specific Gravity (water = 1): 1.100
Section 10: STABILITY AND REACTIVITY
Stability: Stable
Conditions to Avoid: None
Incompatibility Hazards: Avoid strong oxidizers, chlorine releasing chemicals, and
ammonia.
Hazardous Reactions: None known
Hazardous Decomposition Products: None known
Hazardous Polymerization: Will not occur
Section 11: TOXICOLOGICAL INFORMATION
Toxicology: Product not tested.
Section 12: ECOLOGICAL INFORMATION
Ecology: Product not tested.