Pro-Link 105R Marble Polishing Fluid 100017 User Manual
Material safety data sheet
MATERIAL SAFETY DATA SHEET
105R Marble Polishing Fluid
MSDS #1005
11/9/01
Page 1 of 4
Section 1: PRODUCT AND COMPANY IDENTIFICATION
Product:
105R Marble Polishing Fluid
Distributor:
GranQuartz, L.P.
Address:
P.O. Box 2206
Tucker, GA 30085-2206/USA
24-Hour Emergency Telephone Number:
1-800-255-3924 (USA & Canada) or 813-248-0585
MSDS#:
1005
Prepared:
11/9/01
By:
GranQuartz, L.P.
For additional product information call GranQuartz at 800-458-6222 or 770-621-9777 during
regular business hours.
Section 2: COMPOSTION / INFORMATION ON INGEDIENTS
CAS #
Material
Content
16949-65-8
Magnesium Fluorosilicate
10% by weight
This material is classified as hazardous under OSHA regulations.
(See Section 8 for exposure guidelines)
Section 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Opaque orange liquid. Chemical irritates or burns skin, eyes, and mucous membranes.
Toxic if ingested. Presents no unusual hazard if involved in a fire.
POTENTIAL HEALTH EFFECTS
Inhalation: Inhalation of mist may cause severe mucous membrane irritation and burns.
Skin Contact: Burning, Irritation
Eye Contact: Burning, Irritation
Ingestion: Toxic, Burning, Irritation
Signs and Symptoms of Exposure: Effects may not be immediately apparent. First aid
procedures should be followed even in cases of suspected contact.
Long-term or Repeated Exposure: Causes severe skin irritation and burns. Ingestion or
inhalation may be harmful and possibly fatal depending on severity and length of over-
exposure. Chronic over-exposure may cause fluorosis. Product may be absorbed through
the skin and produce signs of fluorosis such as weight loss, brittleness of bones, anemia,
weakness, and stiffness of joints. Internal bleeding may develop.
Aggravated Medical Condition: Any skin disorder, respiratory and/or mucous membrane
condition