Clarion RMX855Dz - Manual (Page 8)

12
RMX855Dz
Adjusting the balance
1. Press A-M button $ and select “BALANCE”.
2. Turning the Rotary knob & clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗
The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button $ and select “FADER”.
2. Turning the Rotary knob & clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
∗
The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
Adjusting the Z-enhancer
1. Press Z-EHCR button 8 and select the Z-
enhancer mode (1 to 3) to adjust.
2. Press A-M button $ and select “Z-EHCR”.
3. Turning the Rotary knob & clockwise adjusts
in the + direction; turning it counterclockwise
adjusts in the
−
direction.
∗
When Z-enhancer 1 is selected, you can adjust
the bass in the range of
±
2.
∗
When Z-enhancer 2 is selected, you can adjust
the treble in the range of
±
2.
∗
When Z-enhancer 3 is selected, you can adjust
the bass and treble in the range of
±
2.
4. When the adjustment is complete, press A-M
button $ several times until the function mode
is reached.
Note:
• If you set the Z-ENHANCER function to ON (1 to
3), you cannot set the tone bypass.
Basic Operations
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LD button $ for 1 second or
longer to turn on the loudness effect. When
the loudness effect is turned on, “LD” lights in
the display.
2. Press and hold LD button $ for 1 second or
longer to turn off the loudness effect. “LD”
goes off in the display.
Note:
• When using a sold separately digital sound pro-
cessor (DPH7500z), a feature called auto loud-
ness is selected. This function is different from the
loudness effect. For further details on the auto loud-
ness feature, refer to the subsection “Output
adjustment of auto loudness, subwoofer and
playback band”.