Vermont Casting DVRSR - Manual (Page 29)

- 29 -
INSTALLATION OF LOGS
Left and right side are defined using the
manifold as reference. Facing the
manifold,the left side is on your left and the
right side is on your right.
Fig. 69
Fig. 70
Top logs must be placed properly onto
notches
LAVA ROCK
The lava rock provided with this fireplace must be
placed on the firebox base on either side of the burner
assembly.
Under no circumstances should
this lava rock be placed on any
part of the burner assembly.
1 . Remove left and right side glass. (See "Glass Re-
moval" section)
2. Remove logs from packaging.
B24
B21
B19
B23
B22
B18
B20
LEFT SIDE VIEW
RIGHT SIDE VIEW
3. Place main log manifold side (B18).
4. Place main log (B19).
5. Place left log manifold side (B20).
6. Place left log (B21).
7. Place right log manifold side (B22).
8. Place right log (B23).
9. Place crossover log (B24).
10. Place ember material on top of burners.
As with all plastic - these are not toys and
should be kept away from children and
infants.
Fig. 68
EMBER MATERIAL PLACEMENT
Separate the ember material into small pieces, roughly
1/2" in diameter and place onto the burner in front of the
front logs. Do NOT pack down, leave in fluffy, loose
conditionfor most realistic ember effect.