Terraillon TPRO 6300 - Manual (Page 29)

29
Recalling the user’s personal stored data
1) Press key [MODE/HOLD]. Two control screens appear followed by the BMI screen.
2) Press key [MODE/HOLD] again, the BFA screen is displayed.
3) Press key [MODE/HOLD] a third time, the MEM screen is displayed.
Refer to the above section: Validation of the height and storing the user’s personal data
Recalling results from the last recorded weighing
1) Press key [▼\ Memory] to enter recall results mode.
2) Press on the arrow or number keys to select the memory to be displayed on the screen.
Confirm the selection by pressing key [ / Tare Height].
3) The values are displayed in the following sequence: ID no. (if any), Height, Weight, Age, Gender and mode:
4) Secondly, the results will appear.
If the recalled memory is empty, the LCD screen displays «-----».
5) To print the results, press and hold key [▲/Print-CE] for 3 seconds.
SETUP MODE
DEACTIVATION OF THE PRINT MODE
In the factory setup, the print mode is activated. If you wish to deactivate it:
• Press and hold [MODE] for more than 10 seconds to go into the setup mode.
• After a control screen, the screen displays «Print».
• Press the [▲] or [▼] keys to select «OFF» then press key [ / Tare Height] to confirm.
ACTIVATION OF THE ID MODE
In the factory setup, the ID mode is deactivated. If you wish to activate it:
• Press and hold key [MODE] for more than 10 seconds to go into the setup mode.
• Go from the PRINT function setup by pressing key.
• The screen will display «Id no». Press the [▲] or [▼] keys to select «ON» and press key [ / Tare Height]
to confirm.
ELECTRONIC MEDICAL SCALE CLASSE III
EN