Terraillon TPRO 6300 - Manual (Page 25)

25
4) Confirm the selection by pressing [ / Tare Height].
5) Use the arrow or number keys to select the memory to be recalled and confirm the selection by pressing key
[ / Tare Height].
6) The user ID, if previously recorded, and the height will appear on the screen.
Confirm the memory selection again by pressing key [ / Tare Height].
7) The screen then scrolls «0», then «0.0 Kg».
8) Repeat from point 5 of the section above: Validation of height and storing users’ personal data.
RECALLING RESULTS FROM THE LAST RECORDED WEIGHING
1) Press key [▼\ Memory] to enter the «recall results» mode.
2) Press on the arrow or number keys to select the memory to be displayed on the screen.
Confirm the selection by pressing key [ / Tare Height].
3) The values are displayed in the following sequence: ID number (if any), height, weight and BMI.
If the recalled memory is empty, the screen will display «- - -».
4) To print the results, press and hold key [▲/Print-CE] for 3 seconds.
WEIGHING WITH IMPEDANCE (BODY FAT) ANALYSIS WITH USER MEMORY
1) Press key [MODE/HOLD] once, after two control screens, the symbol BMI appears on the display:
ELECTRONIC MEDICAL SCALE CLASSE III
EN
Screen 1
WEIGHT HEIGHT BMI >0< NET STA HOLD
CM
%
Kg
lb
A
G
E
Screen 2 Screen 3