Terraillon TPRO 6300 - Manual (Page 23)

23
ELECTRONIC MEDICAL SCALE CLASSE III
EN
WEIGHING WITH BMI FUNCTION AND USER MEMORY
1. Press the [MODE/HOLD] key once, after two control screens, the symbol BMI appears on the display screen:
Press [ / Tare Height] key to confirm selection.
2. Wait until the scales display «STEP».
3. Step onto the scales.
NB: If you wish to use ID numbers for each user, refer to the setup section.
If you have activated the ID mode, the screen displays «- - - -», enter a 4-digit ID then press key
[ / Tare Height] to confirm..
4. The height display flashes.
a - For models without electronic height meter
Input the height with the number keys.
b - For models with electronic height meter
• Check that the meter has been returned to its starting position before measuring height.
NB: If the height meter has not been returned to its starting position before use, the LCD screen displays
«InIt».
Return the height meter to its starting position.
• Extend the height meter and adjust it to the person’s height. The person’s height will be displayed on the screen.
The user can also press key [▲/Print-CE] to input data via a keypad rather than using height meter data.
c - Validation of the height and recording of user’s personal data
 If you do not wish to store the user’s data
Confirm the height immediately by pressing key [ / Tare Height].
 If you wish to store the user’s personal data
Screen 1
WEIGHT HEIGHT BMI >0< NET STA HOLD
CM
%
Kg
lb
A
G
E
Screen 2 Screen 3