Cisco SFS 7008P - Manual (Page 9)

9
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
78-17434-01 Rev. A0
Installing the Cisco SFS 7008P Switch into a Rack
Installing Optional High-Availability Components
If you purchased a High-Availability (HA) package, install the following components:
• Redundant Power Supply; see the power supply locations in Figure 7 . Install the second power
supply according to the directions in the Power Supply Module Installation Guide in the package.
Figure 7 Power Supplies and Fans Located in the Front of the Unit with the Bezel Removed
• Redundant Fan Tray; see the fan locations in Figure 7 . Install the second fan according to the Fan
Module Installation Guide in the package.
• Redundant Management Interface Module; see the location of the Management I/O Modules in
Figure 8 . Install the second I/O Module according to the directions in the Management Interface
Module Installation Guide in the package.
154497
System
Status LED
Power Supply
Status LED
Power Supply
identity LED
Power supplies
Fan Fan
Node slot 1 Slot 9
Slot 10
Slot 11
Slot 12
Slot 13
Slot 14
Node slot 2
Node slot 3
Node slot 4
Core slot 1
Core slot 2
Fan tray LED