Cisco SFS 7008P - Manual (Page 5)

5
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
78-17434-01 Rev. A0
Verifying Basic Hardware
Figure 2 Cisco SFS 7008P Switch Front ViewWithout Bezel
Step 4 Verify that you have at least one power supply installed. (See Figure 2 .)
Step 5 Verify that you have at least one fan module installed. (See Figure 2 .)
Step 6 Verify that you have at least one fabric module installed in one of the node slots. The node slots are 9,
10, 13 and 14. (See
Figure 2 .)
Step 7 Verify that you have two LIMs installed for each fabric module in the node slots. See Figure 3 for an
example of the connections between the LIMs and the fabric modules in the node slots:
154497
System
Status LED
pp y
Status LED
Power Supply
identity LED
Power supplies
Fan Fan
Node slot 1 Slot 9
Slot 10
Slot 11
Slot 12
Slot 13
Slot 14
Node slot 2
Node slot 3
Node slot 4
Core slot 1
Core slot 2
Fan tray LED