Canon DR-5080C EN - Manual (Page 5)

S T E P
4 If you are scanning a stack of documents with the DR-5020/5080C
set to Remote or Semi-Auto, first prepare the papers so that the
stack’s edges are even. Then load the stack onto the document tray
with the documents face up, their top edge inserted first into the
scanner. (If you are using Manual mode, set the single sheet onto the
document tray in the same manner.)
4
▲
S T E P
5 Set the paper guides on the document tray to match the width of the
documents to be scanned.
Semi-Auto mode, Manual mode: To scan more pages, reload the document tray and
press the Start button. To end scanning, press the Stop key.
▲
S T E P
6 Use the application software to instruct the scanner to start scanning.
(If you are using Semi-Auto mode, at this point you will have to take
the extra step of pressing the Start button to begin.)
▲
R E M O T E • S E M I - A U T O • M A N U A L
S C A N N I N G B A S I C S
1