Ryobi BD4600 - Manual (Page 11)

11
ASSEMBLy
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Fig. 5
 Miter Gauge
 Hex Key
 Worktable
 Work Support
 Operator’s Manual (not shown)
LOOSE PARTS
The following items are included with the tool:
 Sanding Disc
 Disc Guard
 Phillips Screws ()
 Socket Head Screws, M8 x 1 ()
 Washers ()
SAndinG diSC
Miter GAuGe
WorK
SuPPort
SoCKet HeAd
SCreWS
diSC GuArd
WorKtABle
HeX KeY
WASHerS
PHilliPS
SCreWS