Ryobi AG700 - Manual (Page 12)

1
ASSEMBLy
Fig.
To
TiGHTen
Side
HAndle
WARNING:
The side handle must always be used to help prevent
loss of control and possible serious injury.
INSTALLING THE SIdE HANdLE
See Figure 2.
 Unplug the tool.
 Insert the side handle into the desired operating
position.
 Securely tighten by turning the side handle clockwise.
NOTE: The handle can be installed on the top, left, or right
side of the tool, depending on operator preference.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes
resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
OPERATION
APPLICATIONS
You may use this product for the purposes listed below:
 Grinding metals
 Sanding wood or metal surfaces
 Polishing and buffing
SWITCH TRIGGER
See Figure 3.
To turn the tool ON, depress the lock-off/lock-on button,
then depress the switch trigger. To turn it OFF, release the
switch trigger.