Ryobi AG700 - Manual (Page 11)

11
kNO W yOUR MULTI-PURPOSE GRINdER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you a
re attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
90˚ ROTATING HANdLE
The handle rotates 90˚ to the l eft or right for ease of use.
LIVE TOOL INdICATOR
The live tool indicator is located on the handle of the grinder
and indicates that the tool is connected to a power sup-
ply.
LOCk-OFF/LOCk-ON BUTTON
The lock-off/lock-on button serves both to unlock the switch
trigger and to allow the switch trigger to be locked on.
SIdE HANdLE
The side handle can be installed on the top, left, or right side
of the tool, depending on operator preference, for stabilization
and must be used during all operations. In addition to main-
taining safe control during use, the side handle also provides
convenient ease of operation for the operator.
SPINdLE LOCk
The spindle lock keeps the spindle from turning while install-
ing and removing wheels and discs.
SWITCH TRIGGER
The tool has a conveniently located switch trigger.
TOOLLESS GUARd
A toolless protective guard deflects sparks and metal chips
during grinder use.
VARIABLE SPEEd dIAL
The variable speed dial enables the tool to operate faster or
slower, depending on the selected speed.
WRENCH STORAGE
The wrench can be easily stored in the side handle when
not in use.
FEATURES
ASSEMBLy
UNPACkING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
PACkING LIST
Multi-Purpose Grinder
Side Handle
Wrench
Rubber Disc
Sanding Disc
Spanner Nut
Polishing Bonnet
Tool Bag
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.