Ryobi ELL0002 - Manual (Page 8)

8 9
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Self-Leveling Laser
Multi-Function Base
Rough-Surface Adaptor
Hook-and-Loop Strap
Push Pins (2)
AA Batteries (3)
Case
Operator’s Manual
WARNING:
If any parts are missing, do not operate this tool. Please
return to the place of purchase or call 1-800-525-2579
for assistance.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
OPERATION
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this tool for the purposes listed below:
n
Hanging pictures
n Projecting a laser line on adjacent and opposite walls
n Aligning electrical outlets or ceiling lights
n Leveling shelving or cabinetry
n Installing chair rail and crown molding
n Installing towel bars, curtains, etc.
n Mapping out drop ceilings