Petsafe Petporte Smart Flap® Microchip Cat Flap - Manual (Page 14)

14
Extended Modes - Quick Guide
Please see page 16 for a full explanation of each Extended Mode.
Press and hold both the Red and Green Buttons simultaneously for more than 2 seconds and then release to enter the Extended Mode menu.
When in Extended Modes, the green light illuminates and you start in Exit Mode. Modes are selected by pressing the Red Button to go
“up” a mode and the Green Button to go “down” a mode. The current mode is indicated by a number of beeps. When you are in the
mode you require a quick press of both buttons simultaneously will activate that mode.
No. of Beeps Mode Function
1 Exit Mode Cancels the extended mode option system and returns the Petporte smart
fl ap
® to a normal mode of operation.
2 Open Mode The green light will fl ash and the green lock will lower allowing any cat
access through the Petporte smart fl ap
® .
3 Silent Mode The audible beep will no longer sound when your cat is recognised by the
Petporte smart fl ap
® .
4 Set Light Level Mode Sets the desired light level for which the cat fl ap will lock and unlock during
Night Mode operation.
5 Lock Return Time The default time for your Petporte smart fl ap ® ’s locks to return to their
locked positions after your cat’s microchip has been recognised is 4
seconds. However, should you have a particularly timid cat, or if your cat is
frequently chased by other cats, the lock return time can be lengthened or
shortened.
6 Low Battery Lock State If, when the Petporte smart fl ap ® is running in battery mode, the battery
charge runs low, the Petporte smart fl ap ® has a built in option to allow the
locks to be set at a specifi ed open or closed position.
7 Timer Mode Sets the specifi c times of day for which the cat fl ap will lock and unlock
during Night Mode operation.