Extinguish flame options, Caution, Warning and safety tips during operation – Outdoor Great Room Venturi FlameTM Technology User Manual
Page 2

O p e r a t i n g I n s t r u c t i o n s ( c o n t . )
Extinguish Flame Options
Allow to Burn out
Allow to burn until the gel fuel is gone and flame is out (1
– 1
1
/2 hours).
To Extinguish Flame
Use gel snuffer with extended handle to extinguish.
After extinguishing, wait at least 10 minutes before removing top assembly and replacing can lid securely.
CAUTION
Allow time for the can to cool before touching.
Can will be HOT!
Always replace the gel can lid when not in use.
Re-lighting Gel:
Make sure the gel can has cooled down and then gently stir gel. The gel will form a
film on the top over time and will not burn properly unless stirred prior to re-lighting.
WARNING AND SAFETY TIPS DURING OPERATION
Always have a Fire Extinguisher nearby when any flame is present.
Never pour additional fuel into burning or hot gel can. This could cause serious injury.
Do Not touch glass when flame is burning or shortly after extinguishing.
Allow a minimum of ten minutes for glass to cool before handling.
Never move the product while burning
Never leave children unattended near unit during operation.
Hairline heat-stress cracks may appear over time. These are normal and do not effect safety of
the unit. If cracking is severe or deep, replacement is required.
Indoor Operation: Gel fire container
must be secured in position. When burning, this product
generates about 9,000 BTU’s per hour. It generates water vapor and carbon dioxide. If the product is
operated in a small room or confined space, it may be necessary to open a window while operating to
reduce humidity and manage room temperature.
2015 Silver Bell Road • Suite 195 • Eagan, MN 55122
Toll Free: 1-866-303-
4028 •
Order clean-burning Venturi Flame Gel Fuel
or visit your Outdoor Room Dealer Today
Get 10% OFF retail with this coupon.
Not valid with other offers.
Warranty:
Your Venturi Flame is covered under a
1-year manufacturer
’s warranty. Please visit
register your product.