Outdoor Great Room Outdoor Kitchen Tops - Manual (Page 2)

2015 Silver Bell Road • Suite 195 • Eagan, MN 55122
Toll Free: 1-866-303-4028 • [email protected]
Revised 5/29/2014
W W W What can I do to maintain the finish? hat can I do to maintain the finish? hat can I do to maintain the finish? hat can I do to maintain the finish?
•
Keep the top clean do not allow dust, dirt, water to stand on the top. Your top is very similar to
your kitchen counter except for outdoor use. Use a mild mixture of dish detergent and warm
water.
•
Do not put the cover on when the table is wet.
•
Cover the unit to protect from buildup of water, snow, dust, dirt, and debris.
•
Ensure the top is dry prior to covering for an extended period.
How can I return How can I return How can I return How can I return my top to my top to my top to my top to its original appearance? its original appearance? its original appearance? its original appearance?
•
First clean using a diluted solution of vinegar and water to remove any dirt or debris that may
have accumulated on the surface.
•
If the top remains dull, reseal you top with SC-Sealer from The Outdoor GreatRoom Company.
•
After cleaning ALL dust and debris from the top, allow the top to dry. Then spray with OGC SC-
SEALER spray sealer. Do a test area first to ensure no reaction. Follow instructions on can for
spraying.
•
Allow the surface to cure for 24 hours before exposing to water or use.
How can I repair minor surface scratches? How can I repair minor surface scratches? How can I repair minor surface scratches? How can I repair minor surface scratches?
•
After cleaning ALL dust and debris from the top, allow the top to dry. Then spray with OGC SC-
SEALER spray sealer. Do a test area first to ensure no reaction. Follow instructions on can for
spraying.
•
Allow the surface to cure for 24 hours before exposing to water or use.
Additional Info Additional Info Additional Info Additional Info
•
If resealing does not work, then you may need to strip the top surface and reseal the table to get
that new finish
•
This process must be done outdoors in a well-ventilated area. Use acetone to remove any sealer
on the unit, clean the unit with vinegar solution, rinse the top clean and dry
•
After the top is stripped clean and dry use the spray sealer to completely cover the top follow
the instructions on the can. Do not put the material to
o thick to cause runs or bubbling.