Outdoor Great Room Napa Valley 2424 Fire Pit - Manual (Page 6)

6 | P a g e
Gas Connection
1. With proper orifice installed for the application
and metal flex hose attached (see burner
owner’s manual) set burner in base with burner
neck pointed toward the control panel.
2. Connect the incoming gas hose to the valve and
tighten securely. Repeat with flexible metal gas
line from the valve to the underside of burner.
It is not recommended to use Teflon tape or
pipe dope on the connection to the valve with
flare fittings.

LPG installations use the hose and regulator
provided with the burner.

For Natural Gas hookup information and any
other info not listed here consult your Crystal
Fire owner’s manual.
Attach incoming
gas here
Read and understand your Crystal Fire owner’s manual
before beginning burner hookups or using the device.