Nexen XHW 848200 - Manual (Page 4)

4
FORM NO. L-20004-K-1209
GENERAL SPECIFICATIONS
GENERAL SAFETY PRECAUTIONS
CAUTION
Use lifting aids and proper lifting
techniques when installing, removing,
or placing this product in service.
WARNING
Ensure proper guarding of the product is
used. Nexen recommends the machine
builder design guarding in compliance with
OSHA 29 CFR 1910 “Occupational Safety
and Health Hazards”.
WARNING
This product is capable of emitting
a spark if misused therefore is not
recommended for use in any explosive
environment.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
Surface temperature may exceed
safe handling limits during
operation. Do not touch.
Specifications
Torque: Up to 565 Nm (5000 in-lbs)
Actuation Pressure: 1 - 5.5 bar (14.5 - 80 psi)
Service Temperature: 4.5 - 104 C (40 - 220 F)
Approximate Weight: Up to 50 kg (110 lbs)
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
Watch for sharp features when
interacting with this product. The parts
have complex shapes and machined
edges.
CAUTION
This product has possible pinch
points. Care should be taken when
interacting with this product.