Esc = n – CITIZEN CBM1000II User Manual
Page 33
— 31 —
ESC = n
[Function]
Data input control
[Code]
<1B>H<3D>H
[Range]
0
n
255
[Outline]
Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows:
Bit
Equipment
Value
0
1
0
Printer
Invalid
Valid
1
Not defined
2
Not defined
3
Not defined
4
Not defined
5
Not defined
6
Not defined
7
Not defined
• When the printer has not been selected, this printer abandons
all the received data until it is selected by this command.
[Caution]
• Even when the printer has not been selected, it can become
BUSY state through printer operation.
• When the printer is deselected, this printer discards all the
data until it is selected with this command. (Except DLE EOT,
DLE ENQ, and DLE DC4)
[Default]
n = 1