AVF MWC84 - Manual (Page 2)

Step 5
Install and Setup shelves
Cable
Passage
Step 6
A)Position mount or item on panels. (across both panels if possible)
B)Mark hole locations with pencil.
C)Drill holes using 11/32 drill bit.
D)Open bracket mount Bag.
Pass 8mm Bolts through bracket. (drill holes larger if required)
Place large fender washer and Nut and tighten with wrench.
Door Hidden
for Visibility.
Example
bracket not
included.
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Attaching Uprights and feet.
Page 2
of 2
Attaching Panels and mounting items
Step 4
Insert first panel from top into tracks.
Make sure to hold uprights together
before inserting screws.
Repeat with second panel.
Step 3
Set the Cabinet with doors facing up.
Insert Carriage bolts through all
3 pieces and a nut from the bottom.
Once all 6 are tight. stand unit up.
End