B&C Technologies DI-475 Industrial - Manual (Page 3)

SECTION 1
IMPORTANT INFORMATION
A. RECEIVING AND HANDLING
The dryer is shipped in a protective stretch wrap cover with protective cardboard corners and
top cover (or optional box) as a means of preventing damage in transit. Upon delivery, the
dryer and/or protective packaging, and wooden skid should be visually inspected for shipping
damage. If any damage whatsoever is noticed, inspect further before delivering carrier
leaves.
Dryers damaged in shipment:
1. All dryers should be inspected upon receipt and before they are signed for.
2. If there is suspected damage or actual damage, the trucker’s receipt should be so
noted.
3. If the dryer is damaged beyond repair, it should be refused. Those dryers which were
not damaged in a damaged shipment should be accepted, but the number received
and number refused must be noted on the receipt.
4. If you determine that the dryer was damaged after the trucker has left your location,
you should call the delivering carrier’s freight terminal immediately and file a claim.
The freight company considers this concealed damage. This type of freight claim is
very difficult to get paid and becomes extremely difficult when more than a day or two
passes after the freight was delivered. It is your responsibility to file freight claims.
Dryers/parts damaged in transit cannot be claimed under warranty.
5. Freight claims are the responsibility of the consignee, and all claims must be filed at
the receiving end. Our company assumes no responsibility for freight claims or
damages.
6. If you need assistance in handling the situation, please contact our office
IMPORTANT: The basket (tumbler) section of the dryer must be
transported and handled in an upright position at all times.