Auralex MiniFusor Sound Diffusor User Manual
Minifusor, Quadfusor, T’fusor
MiniFusor
™
/
QuadFusor
™
/
T’Fusor
™
MiniFusor
™
/
QuadFusor
™
/
T’Fusor
™
USER GUIDE
USER GUIDE
938-1212.QuadFusor TFusor MiniFusor User Guide.indd (09/05/2013 - 7:59 AM)
938-1212.QuadFusor TFusor MiniFusor User Guide.indd (09/05/2013 - 7:59 AM)
Thank you for purchasing
Auralex
®
MiniFusor
™
/
QuadFusor
™
/
T’Fusor
™
!
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the
QuadFusors
&
T’Fusors
are also sized to fit 2’x2’ drop ceiling grids.
The
MiniFusors, QuadFusors
&
T’Fusors
are supplied with the
Auralex EZ-Stick Pro
™
peel & stick tabs.
Be advised that the
EZ-Stick Pro Tabs
are designed for permanent installations and will damage drywall and
painted surfaces when removed. For installations that require little or no damage to the wall surface we recommend
the use of
Auralex EZ-Stick Tabs
. See your
Authorized Auralex dealer
for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar non marring method. Be sure the wall surface where the
EZ-Stick Pro Tabs
™
will adhere
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the tabs will
adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the
EZ-Stick Pro Tabs
and affix it to the rear side of the perimeter flange at the
desired locations, usually near the corners.
Thank you for purchasing
Auralex
®
MiniFusor
™
/
QuadFusor
™
/
T’Fusor
™
!
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the
QuadFusors
&
T’Fusors
are also sized to fit 2’x2’ drop ceiling grids.
The
MiniFusors, QuadFusors
&
T’Fusors
are supplied with the
Auralex EZ-Stick Pro
™
peel & stick tabs.
Be advised that the
EZ-Stick Pro Tabs
are designed for permanent installations and will damage drywall and
painted surfaces when removed. For installations that require little or no damage to the wall surface we recommend
the use of
Auralex EZ-Stick Tabs
. See your
Authorized Auralex dealer
for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar non marring method. Be sure the wall surface where the
EZ-Stick Pro Tabs
™
will adhere
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the tabs will
adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the
EZ-Stick Pro Tabs
and affix it to the rear side of the perimeter flange at the
desired locations, usually near the corners.
(Continued on back)
(Continued on back)