Allen&Heath ILIVE MIXPAD - Manual (Page 2)

- Channel ganging
- Aux source routing options
- Library, Scene and Show memory store and recall
- Scene Safes edit
- SoftKeys
- Signal Generator
- Talkback
- System configuration, options and preferences
- User Profiles
MixPad does not support:
- xDR-16 audio expanders (will see the xDR channels but not its Preamps),
- Dual-Rack (will not see the Slave channels).
- Modular iLive Surface preamp control (will control Trim but not Gain).
Requirements
Any iLive MixRack running V1.9 or higher version firmware, with a good
wireless router (wireless access point) connected to one of its NETWORK
ports. The iLive firmware minor version number does not need to be identical
to the MixPad version, for example MixPad V1.91 would run on iLive V1.92.
Refer to the Allen & Heath web site for more information.
For more on Wi-Fi connection refer to
Appendix 1 later in this guide.
For help with troubleshooting refer to
Appendix 2 .
iPad settings
MixPad handles a large amount of processing and metering data. For best
performance shut down other applications running in the background. Do this
by double tapping the Home button to display all open applications on the
lower toolbar. Touch and hold each icon until the red circle appears, then
touch the red circle to close it.
WiFi connection
Make sure the iPad
Wi-Fi is turned ON in the Settings screen. Choose your
wireless router from those shown in the Network list.
For security we recommend you
password protect your wireless router . The
iPad remembers the network settings. To prevent an iPad connecting again
in future without the password, for example if you have let a guest engineer
access your iLive with their own iPad, select your network in their iPad
Settings Wi-Fi
menu and use the ‘Forget this network’ function.