Allen&Heath ILIVE MIXPAD - Manual

iPad MixPad Help
October 2012
_____________________________________________________________
iLive MixPad Version: V1.90 for iPad
Important ! - This version of MixPad is for iLive running firmware V1.9 and is
not compatible with iLive V1.8 or earlier firmware.
iLive
MixPad is an engineer’s mixing tool providing wireless mobile control for
the Allen & Heath iLive digital live sound mixing system. It is the perfect
companion to the iLive Surface or Editor, giving you the freedom to walk the
room or stage and control the sound right where it is needed.
V1.90 adds new features and improvements:
- Tap Tempo control for Delay FX
- Stereo Aux Pan control
- Ability to add blank spaces in Custom Layers
- Assign up to 32 strips in Custom Layers
- Strip scrolling improvements
- Metering improvements (Multicast is no longer required)
PLEASE READ THE FOLLOWING TO LEARN MORE ABOUT MixPad:
MixPad is intended for working with the mix and channel processing.
Things you can control:
- Access any input channel, mix master, FX send or return, or DCA
- Fader levels, mutes, pan / image controls
- Aux and Matrix sends and Pre/Post switching
- Stereo Aux Pan control
- Delay FX tap tempo control
- DCA and mix assignments
- Preamp Gain, Pad and 48V
- Trim, HPF, Gate, PEQ, GEQ, Comp, Lim/De-Esser, Delays
- Name and colour channels
- RTA and PAFL for the GEQ
- Full signal metering
- Create Custom strips for personalised channel layout
- Personalise the MixPad colour scheme
MixPad is not intended for system setup or memory access. The
following functions are not available on MixPad and require an iLive Surface
or laptop running iLive Editor:
- Input PAFL
- FX parameter control (except Tap Tempo)
- FX Rack dynamic EQ and multiband Comp
- Input source, stereo width, insert and output patchbay