Allen Sports SST1 - Manual (Page 8)

INSTRUCTIONAL
OWNER’S MANUAL
p
8
INSTALLING THE FRONT FORK
NOTE:
NOTE:
The Jogger Kit includes :
Front fork
Front wheel
Handlebar
FIGURE 25.
FIGURE 26.
FIGURE 29. FIGURE 30. FIGURE 31.
FIGURE 27.
Remove QR pins from hitch arm, and fold hitch arm back to folded away position(Fig 26). Refit the QR pin to fix the hitch
arm (Fig 27). Remove the QR pin from the right side receiver to make way for fork installation.
STEP 2:
STEP 3:
WARNING!: After fixing fork in place, push, pull and tug the fork to make sure it is secure and stable. Failure to fix
the fork properly could result in failure and serious injury to you or your child.
STEP 1:
When you slide the fork tube into the bracket, the slot will engage with the bolt to hold it in place. When fully engaged,
the hole in the U-bracket will align with the hole in the fork tube (Fig 30).
First, take the jogger fork, and insert the slotted swaged tube ends into the U-shaped brackets on the front of the frame
(Fig 29). You will notice there is a bolt through the rear part of the U-channel on each side.
Finish assembly, insert QR pin through the U-bracket, and lock the pin (Fig 31).