Allen Sports AST200 - Manual (Page 7)

INSTRUCTIONAL
OWNER’S MANUAL
p
7
TRAILER MAINTENANCE
Your trailer will give you many years of service with minimal care. To ensure safe and dependable
operation, we recommend the following regular maintenance. Before each ride:
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 1:
Make sure that wheels are fully secure on the frame. Wheels must be fully inserted to lock in place.
Check all fasteners to make sure that they are tight, and tighten or replace as needed.
Check tires for wear and proper inflation as listed on the tire sidewall. Use only hand-operated
pump to avoid tire damage. Under- or over inflation can result in unsafe handling.
Double check hitch attachment, making sure that QR Pin is locked, and that safety strap is in place.
Check harness strap for wear, and made sure that buckles lock properly.
ANNUALLY: Once a year, or sooner if needed, have the trailer inspected by a qualified bicycle
mechanic for signs of wear or needed adjustment.
AS NEEDED: Trailer can be cleaned with a mild detergent and water. Do not remove seat or cover
for washing. Do not use harsh chemicals or water, as they may damage fabrics or
the frame materials or surfaces.
FOLDING FOR STORAGE AND TRANSPORT
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7:
STEP 8:
STEP 9:
NOTE:
STEP 1:
Unclip the tow bar safety strap from the “D” ring, and remove pin to remove hitch from frame.
Remove children and all cargo from inside the passenger compartment.
Clip the end of the strap back on to the tow bar “D” ring.
Remove the flag and pole and separate the three sections.
Remove the quick-release pins form the stub axles of the rear wheels.
Remove the quick-release pin from the tow bar bracket at the front corner of the trailer.
Fold the tow bar back under the trailer, and replace the quick-release pin through
the tow bar and U-channel
Place wheels and flag inside the passenger compartment, and close the front cover.
Fold upper cabin as shown at side:
a. Remove 4-season Rain cover
b. Remove QR pin from both sides.
c. Fold frame down as shown.
d. Fold in until trailer is flat
Store trailer in a cool, dry environment, away from direct sunlight. After extended periods of storage,
check tires for wear or cracking, and fabric and strapping for signs of wear. After extended periods of
storage, it is recommended that the trailer is inspected by a qualified bicycle mechanic prior to use.
Warranty:
IF YOUR PRODUCT REQUIRES WARRANTY SERVICE, PLEASE DO NOT
RETURN IT TO RETAILSTORE. PLEASE CONTACT:
ALLEN SPORTS USA
(800) 722-5536 ~ [email protected]
Please note that all returns and exchanges are subject to the return policy
of the retailer where the product was originally purchased
R. A. ALLEN CO., INC. - 505 BEACHLAND BLVD. - STE. 5 - VERO BEACH, FL
32963
Product designed in USA, Made in Ningbo, China