Instructional owner’s manual, Securing child with 5-point safety harness, Attaching trailer to bicycle – Allen Sports AST100 User Manual
Page 6
INSTRUCTIONAL
OWNER’S MANUAL
p
6
SECURING CHILD WITH 5-POINT SAFETY HARNESS
WARNING!
To avoid serious injury, children should always wear the seat belt, shoulder strap, and a helmet!
STEP 1:
STEP 2:
NOTE:
Undo the lap belt buckle and seat the child in the CENTER of the trailer.
Buckle the lap belt [A] over the child’s lap, and pull the strap until the
belt is tight.
FOR ONE CHILD:
Place the two center shoulder straps [C] over the child’s shoulders,
and clip both straps into “D” Ring [D] of the center crotch strap.
Adjust shoulder strap height of the child, then pull the straps until
they are snug.
Clip the outer shoulder strap on either side into the “D” Ring
of the outer crotch strap directly below. This will keep the
straps that are not in use out of the way.
WARNING!:
Your trailer is designed to attach to most full-sized bicycles. The trailer’s hitch must be
attached to the rear axle of the bike. Do not use trailer if the hitch can not be securely
attached to rear axle. It is recommended that the bicycle(s) to which the trailer will be
attached undergo a safety check by a qualified bicycle mechanic before attaching trailer.
This trailer should never be used with electric bicycles, or any motorcycle or any motorized vehicle
ATTACHING TRAILER TO BICYCLE
STEP 2:
STEP 3:
STEP 4:
STEP 1:
Position hitch over left rear axle of bicycle frame (Fig15).
Loosen LEFT side rear axle to allow the trailer’s hitch to attach to frame.
Tighten axle nut securely, testing to see that hitch is unable to pull loose (Fig16).
Loop Safety Strap around frame and secure to D-ring on hitch arm (Fig 17).
WARNING!:
Safety strap must attach to the bike frame when using this product in trailer mode.
FIGURE 15.
FIGURE 16.
FIGURE 17.