Vermont Casting VCS501 - Manual (Page 8)

8 30005436
VCS501 Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 6: Attach Right Shelf Assembly to Grill
Parts Required:
Right Shelf Assembly
(1) Right Shelf Assy. (Step 4)
(4) 1/4-0 x 1Z\x” Screws (50001383)
() #10-4 x 1/” Screws (50000337)
Figures 6 & 7
Loosely screw in (4-5 turns) four (4) 1/4-0 x 1Z\x” screws to the side of the grill.
Place right shelf assembly onto screws.
NOTE: Ensure the side burner ignitor wire is not pinched as the shelf assembly is installed into the unit.
Secure (tighten) four (4) screws to the grill.
Secure condiment tray to the console with one (1) #10-4 x 1/” screw.
From inside grill, attach 10-4 x 1/” screw to the right shelf assembly.
B348
attach right shelf
11/10
1/4-0 x 1Z\x” Screw
(50001383)
B348
Figure 6
B349
B349
secure right shelf
11/10
10-4 x 1/” Screw
(50000337)
10-4 x 1/” Screw
(50000337
Figure 7
NOTE: Shown without
side burner.