Vermont Casting VCS501 - Manual (Page 11)

11 30005436
VCS501 Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-
ing the grill is recommended.
Step 9: Attach Side Burner Assembly
Follow Side Burner Assembly Instructions to assemble side burner to unit.
Step 10: Install the Ignitor Battery
NOTE: VCS501 Series require one (1) “AA” bat-
tery.
Figure 11
Unscrew the ignition button from the console and
insert the appropriate battery into the housing by
placing the positive side of the battery first. Then
screw the ignition button back into the console.
Check for sparks under each main burner before
proceeding.
B352
Install battery
11/10
Figure 11
B35
Step 11: Install the Backlighting Batteries
NOTE: Eight (8) “AA” batteries are required. (Not included)
Figures 12
Remove the battery case from the battery holder. Insert the eight (8) “AA” batteries.
Attach battery case to back light wire connection. Reinstall battery case in battery
holder with back light connector on the top.
WARNING: Replacing the battery incorrectly might result in an explosion. Replace
the battery only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to your local envi-
ronmental guidelines.
B353
battery case
Battery
Case
B353
Figure 12