Vermont Casting VCS501 - Manual (Page 7)

7 30005436
VCS501 Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-
ing the grill is recommended.
"
SHELF
Left Side Shelf
Right Side Shelf
Condiment Tray Right
Condiment Tray Left
Loosen
Screws
From Inside
Loosen Screws
From Inside
B17
Steps 4 & 5: Right & Left Side Shelf Assembly
Parts Required:
(1) Kit Condiment Tray
(1) Condiment Tray Left
(1) Condiment Tray Right
(1) Hardware Bag Side Shelves (for both right and left side shelves)
(1) Kit Shelf Right
(1) Shelf Right Assy w/Support Brackets, Cover and Side Burner Assembly installed
(1) Kit Shelf Left
(1) Shelf Left Assy. w/Support Brackets
Figure 5
Left Side Shelf
Loosen two () screws on the support front of the left shelf assembly.
Slide the front condiment tray into the gap between front support and the side panel as
shown.
Tighten the two () screws loosened earlier.
Repeat for right side shelf.
Left Side Shelf
Assembly
Right Side Shelf Assembly
(Cover and side burner as-
sembly not shown)
Figure 5