Vermont Casting VCS501 - Manual (Page 13)

13 30005436
VCS501 Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-
ing the grill is recommended.
Set the cooking grates, side by side, on the upper ledge of the grill tub. (Fig. 15) Make sure the finger
groove is facing toward the front of the grill.
Set the warming rack into the supports located on either side of the rear lid.
CAUTION: Do not attempt to turn the cooking grates over while the grill is in use and the grates are hot.
Doing so could result in severe burns and other injuries.
B356
install cooking grates
11/10
Warming Rack
Cooking
Grates
B356
Figure 15
Step 12: Install the Internal Components (continued)