Canon LV-7245 - Manual (Page 49)

41
5. Using On-Screen Menu
¶ Menu Descriptions & Functions [Advanced settings]
Password
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a pass-
word is set, turning on the projector will display the password input screen. Unless the correct password is entered, the
projector cannot project an image.
To enable the Password function:
1. Select [Advanced settings] → [Password] and press the button to select “On”.
The [Password] screen will be displayed.
The [Confirm password] screen will be displayed.
2. Type in a combination of the four SELECT buttons and press the OK button.
NOTE:
• A password must be four to 10 digits in length.
• When you want to cancel registering the password, press the MENU button without entering the password.