Conair EARTHSMART UGH031-0209 User Manual

Page 35

Opera

tion

O p e r a t i o n l

4 - 3

S t a r t i n g t h e C h i l l e r

To start the chiller:

Toggle the power switch to the On or “

I” position. The control display will

illuminate. Facing the chiller’s control, the “To Process” actual temperature
will be on the left, the setpoint temperature is on the right.

See Operation

section entitled, Chiller Sequence of Operation.

Set the cooling temperature setpoint. Use the up arrow button

▲ on the

control, to raise the setpoint. Use the down arrow button

▼ to lower the set-

point. The temperature will ramp up at approximately 1 (one) degree per
second. After 2 (two) seconds of inactivity the setpoint entered will become
the targeted setpoint temperature.

On Position

NOTE: If the setpoint displays “OFF”
in the display, raise the setpoint
with the up arrow button

▲

to see

the actual setpoint.

✐

I n f i n i t y B u t t o n

Pressing the “Infinity” button will acknowledge alarms
and return the user to the Main screen.