Conair MPA User Manual
Conair Refrigerators
WARNING - Reliance on this Manual Could Result in Severe Bodily Injury or Death!
This manual is out-of-date and is provided only for its technical information, data and capacities. Portions of this manual
detailing procedures or precautions in the operation, inspection, maintenance and repair of the product forming the subject
matter of this manual may be inadequate, inaccurate, and/or incomplete and cannot be used, followed, or relied upon.
Contact Conair at [email protected] or 1-800-654-6661 for more current information, warnings, and materials about
more recent product manuals containing warnings, information, precautions, and procedures that may be more adequate
than those contained in this out-of-date manual.
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Introduction
- Description
- Installation
- Unpacking the boxes
- Preparing for installation
- Connecting process and water lines
- Connecting the main power supply
- Testing the installation
- Entering setpoint deviation parameters
- Initial setup
- Changing temperature units
- Enabling/disabling passcode protection
- Selecting the temperature control point
- Installing the Auto Start feature
- Activating SPI communication
- Operation
- Maintenance
- Troubleshooting
- Before beginning
- How to identify the cause of a problem
- Shut Down Alarms
- Warning Alarms
- System Alarms - ERR codes
- Chiller will not power up
- Repair procedures
- Checking / Replacing fuses
- Resetting / Replacing overloads
- Replacing the motherboard
- Replacing the compressor contactor
- Checking the unloader valve
- Replacing the freezestat
- Appendix A
- Appendix B
- Parts / Diagrams