Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 23)

Recommended Tools and Supplies
You need the following tools and supplies to install the system in a two-post
open-frame relay raek:
• #2 Phillips serewdriver
• 11/32-ineh wreneh or nut driver (if ehanging to a flush-mount eonfiguration)
• Masking tape or felt-tip pen to mark the mounting holes
Rack Kit Contents
The two-post raek kit ineludes the following items (see Figure 1-12):
• One pair of slide assemblies (two-post)
• One eable-management arm
• One status indieator eable
• Ten 12-2C X 0.5-ineh pan-head Phillips serews
• Tie-wraps
Figure 1-12. Two-Post Rack Kit Components
pan-head
Phillips screw (10)
T
R a c k I n s t a l l a t i o n G u i d e | 1-19