Motorola B802 - Manual (Page 7)

i Paging/Find handset
• Press ©
on the base. All handsets registered to the base will
Si
I
ring.
To stop the paging, press © on the base again, or press E,
^0, or any keypad key (Q-^3, Q, or ^3) on the ringing
handset.
Answering Machine
Switch the answering machine on / off
Press © at the base. When the base is switched on, the display
shows 0 (or other number, depends on the answering machine
status).
Listen to messages
Press the keys below on the base to perform the respective
functions:
© : Press to stop playing messages or resume playback.
^: Press once to replay current message from the beginning.
Press twice to playback the previous message.
^: Press to play the next message.
^: Press to delete the current message.
^ ^: Increase the loudspeaker volume by one level (1 to 8).
;: Decrease the loudspeaker volume by one level (1 to 8).
^Help
For more solutions, see the full Help section in the user’s guide.
/ cannot pair my mobile phone to the telephone base
• Make sure the Bluetooth function of your Bluetooth enabled mobile phone
is turned on. See your mobile phone user's manual for more information.
• Remove the Motorola B801/B802/B803/B804/B805 from your
mobile phone's Bluetooth device history list (see your mobile phone
user's manual for more information).
• Carefully follow the pairing instructions in the user’s guide, making
sure that your mobile phone is not connected to any other Bluetooth
device(s).
• Turn off your mobile phone, and then turn it on again.
•
Reset the telephone base. Unplug the unit’s electrical power. Wait for
approximately 15 seconds, and then plug it back in. Repeat the
above suggestions.
/ cannot hear any sound on my telephone system
when on a CELLULAR call
• Reset the telephone base. Unplug the unit’s electrical power. Wait for
approximately 15 seconds, then plug it back in.
• Turn off your mobile phone, and then turn it on again.
/ cannot get a dial tone
• Move the handset closer to the telephone base. You might have
moved out of range.
• If the previous suggestions don’t work, disconnect the telephone
base from the telephone jack and connect to a different phone. If
there is no dial tone on that phone either, the problem is in your wiring
or local service. Contact your local telephone company.
• Your line cord might be malfunctioning. Try installing a new line cord.