Getting started – Motorola B802 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r»
Getting started
Step 1. Connect the base
♦ Plug the power adapter with smaller pin plug & telephone line
cord into the base. Power adapter with bigger pin plug is for
charger (for multi-pack only).
♦ Plug the other end of the power adapter & telephone line cord
into the wall jack.
TIPS
Do not place your phone in the bathroom or other humid areas.
Please refer to the user's guide for more cautions when you choose
the location of your phone.
IMPORTANT
Only use the power adapter and telephone line cord supplied with
the product.
Step 2. Install and charge the handset
battery pack
♦ Slide out the battery compartment cover.
♦ Place the supplied rechargeable battery pack in the battery
compartment, with the battery connector plugged in, as shown.
♦ Slide the battery compartment cover back.
♦ Put the handset on the base to charge for at least 24 hours. When
the handset isfully charged the
will indicate that it is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided.
Step 3. Set the display language
♦ Press ^ and
to select SETUP HS.
♦ Press ^ and
to select LANGUAGE.