Motorola CG4500 - Manual (Page 9)

I N T R O D U C T I O N
Front Panel
The seven front-panel LEDs provide information about power, communications, and errors.
LED Color Description
N
\ Green
2 ^ Green
3 ^ Green
4^ Green
%
When the LED is blinking, startup diagnostics are being performed. A solid LED indicates the CG4500 is
on and diagnostics completed successfully.
When the LED is blinking, the CG4500 is scanning for the downstream frequency and the USB and
Ethernet ports are disabled. A solid LED indicates the downstream channel is acquired and USB and
Ethernet ports are enabled. When the LED is off and other conditions apply, the CG4500 can be in the
I nternet security lock mode. Refer to the rear panel section of this manual for the
I nternet security lock mode description.
When the LED is blinking, the CG4500 is scanning for the upstream frequency and the USB and Ethernet
ports are disabled. A solid LED indicates the upstream channel is acquired and USB and Ethernet ports
are enabled. When the LED is off and other conditions apply, the CG4500 can be in the
I nternet security lock mode. Refer to the rear panel section of this manual for the
I nternet security lock mode description.
When the LED is blinking, the CG4500 is scanning for the network connection by requesting an IP
address (DHCP), downloading the configuration file (TFTP), and obtaining network time (TOD). A solid
LED indicates the CG4500 has completed the network connection and established Power, Receive, and
Send function. When the LED is blinking and other conditions apply, the I nternet security lock feature
can be active. Refer to the rear panel section for the I nternet security lock mode description. Refer to
the rear panel section of this manual for the I nternet security lock mode description
4