Viewing the phone status menu – Cisco 7925G-EX User Manual
Page 8
8-8
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing the Phone Status Menu
Related Topics
•
Viewing Security Information, page 8-1
•
Viewing Device Information, page 8-4
•
Viewing the Phone Status Menu, page 8-8
Viewing the Phone Status Menu
The Status menu includes the following options, which provide information about the phone and its
operation:
•
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see
“Viewing the Status Messages” section on page 8-9
•
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see
Viewing Network Statistics, page 8-12
.
•
Call Statistics—Displays the Call Statistics screen, which shows counters, statistics, and voice
quality metrics. For more information, see
Viewing Call Statistics, page 8-13
.
•
Firmware Versions—Displays the Firmware Versions screen, which shows information about the
firmware running on the phone. For more information, see
Viewing Firmware Versions, page 8-16
.
•
Neighbor List—Displays the neighboring APs and information on currently connected APs. See
Using the Neighbor List Utility, page 2-21
.
•
Site Survey—Displays the wireless media across all channels and locates APs that belong to the
Basic Service Set (BSS). See
Using the Site Survey Utility, page 2-22
.
•
Trace Settings—Displays the debug information for the phone. The following debug options are
enabled from this screen:
–
Remote syslog
–
Trace levels
WLAN Regulatory Domain
Identifier for the wireless regulatory domain in which this phone
must operate.
•
1050—North America
•
3051—Europe (ETSI)
•
4157—Japan
•
5252—World mode including Australia/New Zealand, Asia,
and Pacific
USB Vendor ID
Unique code that identifies the vendor as Cisco.
USB Product ID
Unique code that identifies the phone as a Cisco product.
RNDIS Device Address
Manufacturer-assigned unique MAC address for the USB Remote
Network Driver Interface Specification (RNDIS) for the phone.
RNDIS Host Address
Manufacturer-assigned unique MAC address for the USB RNDIS
for the host.
Table 8-3
Model Information Screen Items (continued)
Item
Description