Xpres SubliJet E Epson SureColor T3000 (Power Driver Setup): User Manual - Manual (Page 4)

SubliJet-E: Epson SC-T3000
PowerDriver-E User’s Manual
PAGE 3 of 9 >>
SECTION 1
Copies Sets the number of prints needed per image. Use this feature when multiple prints of
the same image are needed.
Paper Size Sets the desired output paper size used when printing. Adjust this to match the size
of the document you are printing up to 24” in width.
Substrate Sets the substrate being used. Match this to the type of material to which the printed
image will be transferred. Because PowerDriver’s color management is optimized for
each substrate listed, it is important to choose the substrate that most closely
matches the substrate being used.
SECTION 2
OEM Sets the Epson printer driver intended for use with PowerDriver E. This will not
change if you only have one Epson SC-T3000 printer. Changing this feature is useful
when using multiple printers - allowing you to choose between each printer per print
job.