Xpres Crystal Print - Manual (Page 2)

Section 1
Section 2
Section 3
Section 4
Driver Installation & Setup
Crystal Print Process
Crystal to Crystal Process
General Troubleshooting & Tips
Page 1
Page 2
Page 3
Page 3
Installing & setting up the Epson Stylus 1400 Printer
Producing Crystal Print
Joining Crystal to Crystal
General Troubleshooting & Tips
Version 2.1 22/08/2008 NJE
Recommended tools required (not supplied).
1. Stanley knife with sharp blades in good condition
2. Disposable clear vinyl gloves, or anti cut gloves
3. Cutting board with hard surface
4. Glass cleaner to clean finger prints and excess adhesive prior to packaging
5. Spirit Level to ensure machine is positioned correctly on a flat surface
CONTENTS