Workrite Sierra Crank Assembly Instructions for Front and Top-Crank models - Manual (Page 2)

2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra™ Crank Workcenters - Assembly Instructions
Each
Sierra
Crank
leg is
unique.
If not put together
in the correct order,
the table will not
function properly.
Legs are designated
as V1 or V2.
For assembly of two-piece tops, please
refer to separate instructions.
N
Crank Handle Assembly
Qty: 1
H
Crossbar
Qty: 2
J
¼-20 x ⅝” Button head
Machine Screws
Qty: 8
A
Tabletop (size and shape differ for each model)
Qty: 1
B
Side Leg V1
Qty: 1
D
CenterLeg
Qty: 1
D
CenterLeg
Qty: 1
K
5 /
32
" Allen Wrench
Qty: 2
Parts grouped by carton
3-leg 120º tables
P
#12 x ¾" Phillips
head Screws
Qty: 20
M
Long End Hex
Shaft
Qty: 2
L
Short End Hex
Shaft
Qty: 2
For assembly of two-piece tops, please
refer to separate instructions.
A
Tabletop (size and shape differ for each model)
Qty: 1
B
Side Leg
Qty: 2
3-leg 90º tables
O
Crank Handle Connector
Qty: 1
I
Crank Tube
Qty: 2
C
Side Leg V2
Qty: 1
E
Top Bracket
Qty: 1
F
Crossbar
Bracket
Qty: 1
G
¼-20 x ⅝” Button head
Machine Screws
Qty: 6
E
Top Bracket
Qty: 1
F
Crossbar
Bracket
Qty: 1
G
¼-20 x ⅝” Button head
Machine Screws
Qty: 6
N
Crank Handle Assembly
Qty: 1
H
Crossbar
Qty: 2
J
¼-20 x ⅝” Button head
Machine Screws
Qty: 8
K
5 /
32
" Allen Wrench
Qty: 2
P
#12 x ¾" Phillips
head Screws
Qty: 20
M
Long End Hex
Shaft
Qty: 2
L
Short End Hex
Shaft
Qty: 2
O
Crank Handle Connector
Qty: 1
I
Crank Tube
Qty: 2